64330D
1.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)
64910J
2.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
64790B
3.REMOVE BACK DOOR TRIM UPPER PANEL ASSEMBLY
67938A
4.REMOVE BACK DOOR SIDE GARNISH LH
67937B
5.REMOVE BACK DOOR SIDE GARNISH RH
Use the same procedure as for the LH side.
64780A
6.REMOVE BACK DOOR TRIM PANEL ASSEMBLY
7.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Remove the 4 bolts.
|
Remove in this Direction |
Disengage the clips to remove the back door outside garnish as shown in the illustration.
76827A
8.REMOVE NO. 2 BACK DOOR GARNISH RETAINER (w/o Rear View Monitor System)
|
Remove in this Direction |
Disengage the claws to remove the No. 2 back door garnish retainer as shown in the illustration.