Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL RECEIVER › 2016.10–2019.09
RM32K0E _58 Vehicle Interior _061818 DOOR LOCK _0304546 DOOR CONTROL RECEIVER A

DOOR LOCK  DOOR CONTROL RECEIVER  INSTALLATION  


PROCEDURE

Hide 897A0 1.INSTALL DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY

NOTICE:
·

Do not drop, strike or otherwise subject the door control and tire pressure monitoring system receiver assembly to impact.

·

If the door control and tire pressure monitoring system receiver assembly is subjected to an impact, replace it with a new one.



a.
B458209C01
2.927,0.583 3.198,0.823 0.271,0.24 12 false *A 2.938,1.208 3.229,1.427 0.292,0.219 12 false *B
*A for Type A
*B for Type B


Connect the connector.


b.

Engage the guides.


c.

Install the door control and tire pressure monitoring system receiver assembly with the bolt.

Torque:
for Type A : 8.0 N*m (82 kgf*cm, 71 in.*lbf)
for Type B : 13 N*m (133 kgf*cm, 10 ft.*lbf)


Hide 62480A 2.INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH