Home › Engine / Hybrid System › M20A-FXS (LUBRICATION) › OIL PRESSURE SWITCHING VALVE › from 2019.09
RM32K0E _51 Engine / Hybrid System _083956 M20A-FXS LUBRICATION _0404355 OIL PRESSURE SWITCHING VALVE A

M20A-FXS LUBRICATION  OIL PRESSURE SWITCHING VALVE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 51443C 1.REMOVE REAR ENGINE UNDER COVER RH

Hide 15250 2.REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY

a.
A434089

Disconnect the oil pressure control valve assembly connector.


b.

Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the No. 2 timing chain cover assembly.