Home › Engine / Hybrid System › M20A-FXS (HYBRID / BATTERY CONTROL) › HYBRID VEHICLE CONTROL ECU › 2019.09–2020.08
RM32K0E _51 Engine / Hybrid System _083959 M20A-FXS HYBRID / BATTERY CONTROL _0404414 HYBRID VEHICLE CONTROL ECU A

M20A-FXS HYBRID / BATTERY CONTROL  HYBRID VEHICLE CONTROL ECU  INSTALLATION  


PROCEDURE

Hide 89981 1.INSTALL HYBRID VEHICLE CONTROL ECU (for LHD)

a.
A443729

Engage the 2 claws and install the hybrid vehicle control ECU to the ECU integration box RH.

NOTICE:

Make sure that the hybrid vehicle control ECU is securely installed.



Hide 89981 2.INSTALL HYBRID VEHICLE CONTROL ECU (for RHD)

a.
A443730

Engage the 2 claws and install the hybrid vehicle control ECU to the ECU integration box LH.

NOTICE:

Make sure that the hybrid vehicle control ECU is securely installed.



Hide 82877 3.INSTALL ECU INTEGRATION BOX RH (for LHD)

Hide 82878 4.INSTALL ECU INTEGRATION BOX LH (for RHD)

Hide 5.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Click hereGeneral>MAINTENANCE>M20A-FXS AUXILIARY BATTERY>INSTALLATION

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 6.PERFORM INITIALIZATION