Home › Engine / Hybrid System › M20A-FXS (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL › from 2019.09
RM32K0E _51 Engine / Hybrid System _083976 M20A-FXS ENGINE MECHANICAL _0404775 FRONT CRANKSHAFT OIL SEAL A

M20A-FXS ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL RH

Hide 51410 2.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 51443C 3.REMOVE REAR ENGINE UNDER COVER RH

Hide 51107A 4.REMOVE REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH

Hide 13470 5.REMOVE CRANKSHAFT PULLEY ASSEMBLY

Hide 11301C 6.REMOVE TIMING CHAIN COVER OIL SEAL

a.
A426055C01
0.458,1.26 1.792,1.26 true 0.271,1.156 0.583,1.354 0.313,0.198 10 false *a
*a Protective Tape


Using a screwdriver, pry out the timing chain cover oil seal.

NOTICE:

Do not damage the surface of the timing chain cover oil seal press fit hole or the crankshaft.


HINT:

Tape the screwdriver tip before use.