Home › Engine / Hybrid System › M20A-FXS (COOLING) › COOLING FAN MOTOR › from 2019.09
RM32K0E _51 Engine / Hybrid System _084057 M20A-FXS COOLING _0404852 COOLING FAN MOTOR A

M20A-FXS COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363F 1.INSTALL COOLING FAN MOTOR RH

a.

Install the cooling fan motor RH to the fan shroud with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16363G 2.INSTALL COOLING FAN MOTOR LH

a.

Install the cooling fan motor LH to the fan shroud with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16364A 3.CONNECT COOLING FAN WIRE

a.
A432825

Connect the cooling fan wire connector to the cooling fan motor RH and lock with the lever.


b.

Engage the 3 clamps to connect the cooling fan wire to the fan shroud.


Hide 16361K 4.INSTALL FAN LH

NOTICE:

Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.


a.

Install the fan LH to the cooling fan motor LH with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361J 5.INSTALL FAN RH

NOTICE:

Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.


a.

Install the fan RH to the cooling fan motor RH with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16400 6.INSTALL RADIATOR ASSEMBLY