Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM › from 2019.09
RM32K0E _56 Audio / Visual / Telematics _060599 PARK ASSIST / MONITORING _0303371 TOYOTA PARKING ASSIST-SENSOR SYSTEM C

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  C1AE296  Ultrasonic Sensor (Front Left Center) Component Internal Failure  


DESCRIPTION

The front center ultrasonic sensor LH is installed to the front bumper. The clearance warning ECU assembly detects obstacles based on signals received from the front center ultrasonic sensor LH. If the front center ultrasonic sensor LH has an open circuit or other malfunction, it will not function normally.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AE296 Ultrasonic Sensor (Front Left Center) Component Internal Failure A malfunction of the front center ultrasonic sensor LH.
·

Front center ultrasonic sensor LH

·

Clearance warning ECU assembly



CAUTION / NOTICE / HINT

NOTICE:

If DTCs are output after repairs, turn the power switch on (IG) and the TOYOTA parking assist-sensor system on. Then clear the DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>DTC CHECK / CLEAR


PROCEDURE

1.CHECK DTC OUTPUT
a.

Check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
Only DTC C1AE296 is output A
DTC C1AE296 and C1AE287 are output B
No DTCs are output C



A

2.INSPECT FRONT CENTER ULTRASONIC SENSOR LH

B

C

2.INSPECT FRONT CENTER ULTRASONIC SENSOR LH

b.

Result:
Proceed to
OK
NG



OK

3.REPLACE FRONT CENTER ULTRASONIC SENSOR LH

NG

3.REPLACE FRONT CENTER ULTRASONIC SENSOR LH
a.

Replace the front center ultrasonic sensor LH with a new or known good one.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>ULTRASONIC SENSOR (for Front)>REMOVAL

HINT:

All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a new or known good sensor from the other end of the vehicle.



Result:
Proceed to
NEXT



NEXT

4.CHECK DTC OUTPUT
4.CHECK DTC OUTPUT
a.

Clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs
50002 438

b.

Check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes
50001 438

Result:
Result Proceed to
DTC C1AE296 is output A
No DTCs are output B



A

B

END (FRONT CENTER ULTRASONIC SENSOR LH WAS DEFECTIVE)