Check if there is any foreign matter caught between the display and exterior frame of the multi-display.
No foreign matter is caught between the display and exterior frame of the multi-display.
If there is foreign matter between the display and exterior frame of the multi-display, the touch panel will remain pressed, preventing touch switch operation.
Turn the power switch on (ACC) or on (IG) with your hand touching the operating section, non-response may occur.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check for foreign matter on the display.
The display is clean.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check.
Touch the display in the area where the switch malfunction occurs.
A "+" mark appears at the touched position.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (for Radio and Display Type)>REMOVAL
NG