Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) › from 2019.09
RM32K0E _56 Audio / Visual / Telematics _061817 AUDIO / VIDEO _0301273 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  Speaker Circuit  


DESCRIPTION

If there is a short in a speaker circuit, the radio receiver assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the radio receiver assembly or speakers.

WIRING DIAGRAM

E359690E06
5.479,8.094 7.094,8.625 1.615,0.531 10 false Radio Receiver Assembly 5.479,0.531 5.938,0.729 0.458,0.198 10 false F48 5.469,1.417 5.927,1.615 0.458,0.198 10 false F48 5.469,2.5 5.927,2.698 0.458,0.198 10 false F48 5.469,3.375 5.927,3.573 0.458,0.198 10 false F48 5.469,4.469 5.927,4.667 0.458,0.198 10 false F49 5.458,5.323 5.917,5.521 0.458,0.198 10 false F49 5.469,6.427 5.927,6.625 0.458,0.198 10 false F49 5.458,7.302 5.917,7.5 0.458,0.198 10 false F49 5.563,0.323 5.823,0.5 0.26,0.177 10 false 1 5.844,0.542 6.302,0.74 0.458,0.198 10 false FR+ 5.833,1.406 6.292,1.604 0.458,0.198 10 false FR- 5.823,2.51 6.281,2.708 0.458,0.198 10 false FL+ 5.844,3.365 6.302,3.563 0.458,0.198 10 false FL- 5.823,4.458 6.281,4.656 0.458,0.198 10 false RR+ 5.833,5.323 6.292,5.521 0.458,0.198 10 false RR- 5.833,7.292 6.292,7.49 0.458,0.198 10 false RL- 5.833,6.427 6.292,6.625 0.458,0.198 10 false RL+ 5.542,1.219 5.802,1.396 0.26,0.177 10 false 5 5.542,2.302 5.802,2.479 0.26,0.177 10 false 2 5.542,3.188 5.802,3.365 0.26,0.177 10 false 6 4.552,1.271 4.813,1.448 0.26,0.177 10 false 2 4.552,3.229 4.813,3.406 0.26,0.177 10 false 2 4.552,0.406 4.813,0.583 0.26,0.177 10 false 4 4.542,2.354 4.802,2.531 0.26,0.177 10 false 4 5.531,6.229 5.792,6.406 0.26,0.177 10 false 2 5.531,7.083 5.792,7.26 0.26,0.177 10 false 6 5.51,4.219 5.771,4.396 0.26,0.177 10 false 1 5.531,5.125 5.792,5.302 0.26,0.177 10 false 3 1.802,0.656 2.063,0.833 0.26,0.177 10 false 2 1.802,2.635 2.063,2.813 0.26,0.177 10 false 2 1.813,4.573 2.073,4.75 0.26,0.177 10 false 2 1.802,6.583 2.063,6.76 0.26,0.177 10 false 2 1.823,1.24 2.083,1.417 0.26,0.177 10 false 1 1.813,3.24 2.073,3.417 0.26,0.177 10 false 1 1.813,5.208 2.073,5.385 0.26,0.177 10 false 1 1.823,7.135 2.083,7.313 0.26,0.177 10 false 1 4.052,0.417 4.51,0.615 0.458,0.198 10 false TWR+ 4.104,1.302 4.563,1.5 0.458,0.198 10 false TWR- 4.042,2.365 4.5,2.563 0.458,0.198 10 false TWL+ 4.073,3.208 4.531,3.406 0.458,0.198 10 false TWL- 2.458,1.802 2.917,2 0.458,0.198 10 false F85 2.438,3.76 2.896,3.958 0.458,0.198 10 false F86 2.448,1.938 5,2.281 2.552,0.344 10 false Front No. 2 Speaker Assembly RH 2.427,3.927 5.198,4.188 2.771,0.26 10 false Front No. 2 Speaker Assembly LH 0.396,0.75 0.854,0.948 0.458,0.198 10 false I13 0.385,0.948 1.656,1.313 1.271,0.365 10 false Front No. 1 Speaker Assembly RH 0.396,2.75 0.854,2.948 0.458,0.198 10 false J13 0.396,2.917 1.667,3.281 1.271,0.365 10 false Front No. 1 Speaker Assembly LH 0.646,4.677 1.104,4.875 0.458,0.198 10 false K5 0.635,4.844 1.521,5.271 0.885,0.427 10 false Rear Speaker Assembly RH 0.667,6.698 1.125,6.896 0.458,0.198 10 false L5 0.667,6.875 1.542,7.333 0.875,0.458 10 false Rear Speaker Assembly LH 2.281,0.385 2.542,0.563 0.26,0.177 10 false 3 2.281,2.385 2.542,2.563 0.26,0.177 10 false 3 2.26,1.271 2.521,1.448 0.26,0.177 10 false 1 2.271,3.26 2.531,3.438 0.26,0.177 10 false 1 2.479,0.396 2.635,0.594 0.156,0.198 10 false + 2.479,2.385 2.635,2.583 0.156,0.198 10 false + 2.5,1.281 2.656,1.479 0.156,0.198 10 false - 2.479,3.26 2.635,3.458 0.156,0.198 10 false -


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - SPEAKERS)
a.

Disconnect the F48 or F49 radio receiver assembly connectors.


b.

Disconnect the I13 and J13 front No. 1 speaker assembly connectors.


c.

Disconnect the F85 and F86 front No. 2 speaker assembly connectors.


d.

Disconnect the K5 and L5 rear speaker assembly connectors.


e.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F48-1 (FR+) - F85-4 (TWR+) Always Below 1 Ω
F48-5 (FR-) - F85-2 (TWR-) Always Below 1 Ω
F85-3 (+) - I13-2 Always Below 1 Ω
F85-1 (-) - I13-1 Always Below 1 Ω
F48-2 (FL+) - F86-4 (TWL+) Always Below 1 Ω
F48-6 (FL-) - F86-2 (TWL-) Always Below 1 Ω
F86-3 (+) - J13-2 Always Below 1 Ω
F86-1 (-) - J13-1 Always Below 1 Ω
F49-1 (RR+) - K5-2 Always Below 1 Ω
F49-3 (RR-) - K5-1 Always Below 1 Ω
F49-2 (RL+) - L5-2 Always Below 1 Ω
F49-6 (RL-) - L5-1 Always Below 1 Ω
F48-1 (FR+) or F85-4 (TWR+) - Body ground Always 10 kΩ or higher
F48-5 (FR-) or F85-2 (TWR-) - Body ground Always 10 kΩ or higher
F85-3 (+) or I13-2 - Body ground Always 10 kΩ or higher
F85-1 (-) or I13-1 - Body ground Always 10 kΩ or higher
F48-2 (FL+) or F86-4 (TWL+) - Body ground Always 10 kΩ or higher
F48-6 (FL-) or F86-2 (TWL-) - Body ground Always 10 kΩ or higher
F86-3 (+) or J13-2 - Body ground Always 10 kΩ or higher
F86-1 (-) or J13-1 - Body ground Always 10 kΩ or higher
F49-1 (RR+) or K5-2 - Body ground Always 10 kΩ or higher
F49-3 (RR-) or K5-1 - Body ground Always 10 kΩ or higher
F49-2 (RL+) or L5-2 - Body ground Always 10 kΩ or higher
F49-6 (RL-) or L5-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.

Inspect the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

3.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

3.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.

Remove the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.

Inspect the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

4.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

NG

4.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY
a.

Check that the malfunction disappears when a known good speaker is installed.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both LH and RH sides.




Result:
Proceed to
OK
NG



OK

END (FRONT NO. 2 SPEAKER ASSEMBLY WAS DEFECTIVE)

NG

5.INSPECT REAR SPEAKER ASSEMBLY
5.INSPECT REAR SPEAKER ASSEMBLY
a.

Remove the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL


b.

Inspect the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

NG