Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR › from 2019.09
RM32K0E _51 Engine / Hybrid System _060312 2ZR-FXE ENGINE CONTROL _0295707 ENGINE COOLANT TEMPERATURE SENSOR A

2ZR-FXE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89422D 1.INSTALL NO. 2 ENGINE COOLANT TEMPERATURE SENSOR

a.

Apply a light coat of engine coolant to the O-ring of the No. 2 engine coolant temperature sensor.


b.

Install the No. 2 engine coolant temperature sensor to the No. 2 water by-pass pipe with the clip.

NOTICE:
·

If the No. 2 engine coolant temperature sensor has been struck or dropped, replace it.

·

If reusing the No. 2 engine coolant temperature sensor, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the No. 2 engine coolant temperature sensor.




c.

Connect the No. 2 engine coolant temperature sensor connector.


Hide 89422 3.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>2ZR-FXE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Install a new gasket to the engine coolant temperature sensor.


b.
A394211N01
2.01,0.99 1.698,0.594 true 1.219,0.448 1.583,0.646 0.365,0.198 10 true SST

Using SST, install the engine coolant temperature sensor to the water outlet.

SST
09817-33191  

NOTICE:

If the engine coolant temperature sensor has been struck or dropped, replace it.


Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)


c.

Connect the engine coolant temperature sensor connector.


Hide 82121 5.CONNECT ENGINE WIRE

a.

Connect the engine wire with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 6.ADD ENGINE COOLANT (for Engine)

Hide 7.INSPECT FOR COOLANT LEAK (for Engine)

Hide 51441 8.INSTALL NO. 1 ENGINE UNDER COVER

Hide 9.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>2ZR-FXE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION