INSPECT BRAKE LINE PIPES AND HOSES
Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.
Using a mirror, check the entire circumference and length of the brake lines and hoses for:
Damage
Wear
Deformation
Cracks
Kinks
Corrosion
Leaks
Twists
Check all the clamps for tightness and check the connections for leakage.
Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.
Check that the lines are installed properly and pass through the center of the grommets.
INSPECT BRAKE PEDAL
Check the brake pedal.
for LHD:
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE PEDAL (for LHD)>ADJUSTMENT
for RHD:
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE PEDAL (for RHD)>ADJUSTMENT
INSPECT PARKING BRAKE
Check the parking brake.
INSPECT FRONT BRAKE
Check the front brake pads and discs.
for TMC Made:
Click hereBrake>BRAKE (FRONT)>FRONT BRAKE (for TMC Made)>INSPECTION
for TMMT Made:
Click hereBrake>BRAKE (FRONT)>FRONT BRAKE (for TMMT Made)>INSPECTION
INSPECT REAR BRAKE
Check the rear brake pads and discs.
for TMC Made:
Click hereBrake>BRAKE (REAR)>REAR BRAKE (for TMC Made)>INSPECTION
for TMMT Made:
Click hereBrake>BRAKE (REAR)>REAR BRAKE (for TMMT Made)>INSPECTION
INSPECT OR CHANGE BRAKE FLUID
Inspect or change the brake fluid.
Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID>ON-VEHICLE INSPECTION
SAE J1703 or FMVSS No. 116 DOT3
SAE J1704 or FMVSS No. 116 DOT4