The forward recognition camera receives vehicle information from the hybrid vehicle control ECU assembly via the CAN communication line. If the forward recognition camera cannot confirm the vehicle information sent from the hybrid vehicle control ECU assembly, the forward recognition camera stores DTC U030051.
The forward recognition camera receives vehicle information from the hybrid vehicle control ECU assembly via the CAN communication line. If the vehicle information stored in the forward recognition camera does not match the vehicle information sent from the hybrid vehicle control ECU assembly, the forward recognition camera stores DTC U030057.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U030051 | Internal Control Module Software Incompatibility Not Programmed | When the power switch is on (IG) for 3 seconds or more, the forward recognition camera cannot confirm the vehicle information sent from the hybrid vehicle control ECU assembly for approximately 2 seconds or more. | Front camera system |
| U030057 | Internal Control Module Software Incompatibility Invalid/Incompatible Software Component | When the power switch is on (IG) for 3 seconds or more, the vehicle information stored in the forward recognition camera does not match the vehicle information sent from the hybrid vehicle control ECU assembly for approximately 1 second or more. | Front camera system |
If U030051 or U030057 is output by the lane tracing assist system, perform troubleshooting for the front camera system DTC U030051 or U030057.
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA SYSTEM>U030051
| Proceed to |
|---|
| NEXT |
NEXT