Home › General › MAINTENANCE › 2ZR-FXE AUXILIARY BATTERY › from 2020.08
RM32K0E _V1 General _059911 MAINTENANCE _0295427 2ZR-FXE AUXILIARY BATTERY A

MAINTENANCE  2ZR-FXE AUXILIARY BATTERY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL AUXILIARY BATTERY

a.

Install the auxiliary battery to the vehicle.


b.
A394408

Install the No. 2 battery clamp with the bolt.

Torque:
15.4 N*m (157 kgf*cm, 11 ft.*lbf)


c.

Install the battery insulator to the auxiliary battery.


d.

Connect the cable to the positive (+) auxiliary battery terminal and engage the clamp.


e.

Tighten the nut.

Torque:
5.6 N*m (57 kgf*cm, 50 in.*lbf)


f.

Engage the 2 claws to close the battery terminal cap.


Hide 2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

a.

Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 3. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART