1.INSTALL AUXILIARY BATTERY
Install the auxiliary battery to the vehicle.
Install the battery clamp sub-assembly with the bolt and nut.
Connect the auxiliary battery hose.
Connect the cable to the positive (+) auxiliary battery terminal.
Tighten the nut.
|
Close |
Engage the claw to close the battery terminal cap shown in the illustration.
2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.
58440
3.INSTALL BATTERY SERVICE HOLE COVER ASSEMBLY (w/o Spare Tire)
install the battery service hole cover assembly.
58410B
4.INSTALL DECK BOARD ASSEMBLY
5. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART