Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER (except TMC Made GR SPORT) › from 2020.12
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0455086 FRONT BUMPER(except TMC Made GR SPORT) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(except TMC Made GR SPORT)  REASSEMBLY  


PROCEDURE

Hide 16595B 1.INSTALL NO. 1 RADIATOR AIR GUIDE LH

a.
B557775C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guide and claw to install the No. 1 radiator air guide LH as shown in the illustration.


Hide 16593B 2.INSTALL NO. 1 RADIATOR AIR GUIDE RH

a.
B557774C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guide and claw to install the No. 1 radiator air guide RH as shown in the illustration.


Hide 52134G 3.INSTALL FRONT BUMPER BRACKET LH

a.
B473996

Install the front bumper bracket LH with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 52133F 4.INSTALL FRONT BUMPER BRACKET RH

HINT:

Use the same procedure as for the LH side.


Hide 52132A 5.INSTALL NO. 2 FRONT BUMPER REINFORCEMENT

a.
B473995

Install the No. 2 front bumper reinforcement with the 2 nuts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 57014A 6.INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH

a.
B474058

Engage the guides to install the front side member bracket sub-assembly LH.


b.

Install the 4 bolts.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


c.

Engage the wire harness clamp.


Hide 57013C 7.INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

a.
B501045

Engage the guides to install the front side member bracket sub-assembly RH.


b.

Install the 4 bolts.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


Hide 52131A 8.INSTALL FRONT BUMPER REINFORCEMENT

a.
B557750

Engage the guides to install the front bumper reinforcement.


b.

Install the 6 bolts.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


c.
B557749

Engage the wire harness clamps.


Hide 52618 9.INSTALL LOWER FRONT BUMPER ABSORBER

a.
B557776C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guides to install the lower front bumper absorber as shown in the illustration.


Hide 52611 10.INSTALL FRONT BUMPER ENERGY ABSORBER

a.
B557777C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guides to install the front bumper energy absorber as shown in the illustration.


Hide 16561C 11.INSTALL NO. 1 RADIATOR TO SUPPORT SEAL

a.
B557778C01
0,0 0,0 false
V113147

Install in this Direction


Install the No. 1 radiator to support seal as shown in the illustration.


b.
B557741

Engage the wire harness clamp and install the 2 clips.


Hide 53117C 12.INSTALL NO. 1 RADIATOR GRILLE RETAINER

a.
B474008C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the No. 1 radiator grille retainer as shown in the illustration.


Hide 52536 13.INSTALL FRONT BUMPER SIDE RETAINER LH

a.
B474001C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw to install the front bumper side retainer LH as shown in the illustration.


b.
B473999C01
1.198,1.01 1.396,1.188 0.198,0.177 10 true *a 2.583,1.615 2.792,1.771 0.208,0.156 10 true *b
*a Bolt
*b Screw


Install the screw.


c.

Install the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 52535 14.INSTALL FRONT BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52112C 15.INSTALL FRONT BUMPER EXTENSION

a.

except GR SPORT:

i.
B557753

Engage the claws and guides to install the front bumper extension.



b.

for GR SPORT:

i.
B590444

Engage the claws to install the front bumper extension.



Hide 52129B 16.INSTALL FRONT BUMPER LOWER COVER

a.
B557740

Install the 6 grommets.


b.
B557739

Engage the claws and guides to install the front bumper lower cover.


c.
B557738

Install the 2 clips and 6 outside moulding retainers.


d.

Install the 2 screws.


Hide 52114A 17.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (except GR SPORT)

a.

for Extension Mounting Bracket Type A:

i.
B557781C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the front bumper extension mounting bracket as shown in the illustration.


ii.
B557767

Install the 2 screws.



b.

for Extension Mounting Bracket Type B:

i.
B557779C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the front bumper extension mounting bracket as shown in the illustration.


ii.
B557736

Install the 2 screws.



Hide 52128B 18.INSTALL FRONT BUMPER HOLE COVER

a.
B557734

Engage the hook and claws to install the front bumper hole cover.


Hide 52146B 19.INSTALL FRONT BUMPER SIDE MOUNTING BRACKET LH

a.
B454130

Engage the claws to install the front fender liner retainer.


b.
B557733

Engage the claws to install the front bumper side mounting bracket LH as shown in the illustration.


c.
B557732

Install the screw and clip.


Hide 52145C 20.INSTALL FRONT BUMPER SIDE MOUNTING BRACKET RH

HINT:

Use the same procedure as for the LH side.


Hide 52128B 21.INSTALL FRONT BUMPER HOLE COVER LH

a.
B557731

Engage the claws and guide to install the front bumper hole cover LH.


Hide 52127D 22.INSTALL FRONT BUMPER HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 81482C 23.INSTALL FOG LIGHT COVER LH (w/ Fog Light)

a.
B557730

Install the fog light cover LH with the 3 screws.


Hide 81481E 24.INSTALL FOG LIGHT COVER RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 76852A 25.INSTALL FRONT SPOILER COVER LH

a.
B557729

Install the grommet.


b.
B557728

Engage the guides to install the front spoiler cover LH.


c.

Install the clip.


d.
B557727

Install the screw and 2 outside moulding retainers.


Hide 76851A 26.INSTALL FRONT SPOILER COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 27.INSTALL WASHER HOSE (w/ Headlight Cleaner System)

a.

Engage the clamps to install the washer hose.

B557984


Hide 28.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

Hide 29.INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:

Use the same procedure as for the LH side.


Hide 30.INSTALL HEADLIGHT WASHER COVER LH (w/ Headlight Cleaner System)

Hide 31.INSTALL HEADLIGHT WASHER COVER RH (w/ Headlight Cleaner System)

HINT:

Use the same procedure as for the LH side.


Hide 82119C 32.INSTALL NO. 5 ENGINE ROOM WIRE (w/ Wire Harness)

a.

Engage the clamps to install the No. 5 engine room wire.

B557982


Hide 81220 33.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

Hide 81210A 34.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 89347C 35.INSTALL FRONT CENTER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89347B 36.INSTALL FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89347D 37.INSTALL FRONT SIDE ULTRASONIC SENSOR RETAINER (w/ Simple Intelligent Parking Assist System)

Hide 89341L 38.INSTALL FRONT CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89341K 39.INSTALL FRONT CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89341M 40.INSTALL FRONT SIDE ULTRASONIC SENSOR (w/ Simple Intelligent Parking Assist System)

Hide 42.INSTALL FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)