Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER (for TMC Made GR SPORT) › from 2020.12
RM32K0E _59 Vehicle Exterior _061792 EXTERIOR PANELS / TRIM _0455087 FRONT BUMPER(for TMC Made GR SPORT) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for TMC Made GR SPORT)  REASSEMBLY  


PROCEDURE

Hide 16595B 1.INSTALL NO. 1 RADIATOR AIR GUIDE LH

a.
B558024C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guide and claw to install the No. 1 radiator air guide LH as shown in the illustration.


Hide 16593B 2.INSTALL NO. 1 RADIATOR AIR GUIDE RH

a.
B558023C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guide and claw to install the No. 1 radiator air guide RH as shown in the illustration.


Hide 52134G 3.INSTALL FRONT BUMPER BRACKET LH

a.
B473996

Install the front bumper bracket LH with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 52133F 4.INSTALL FRONT BUMPER BRACKET RH

HINT:

Use the same procedure as for the LH side.


Hide 52132A 5.INSTALL NO. 2 FRONT BUMPER REINFORCEMENT

a.
B473995

Install the No. 2 front bumper reinforcement with the 2 nuts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 57014A 6.INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH

a.
B474058C02
0.99,0.51 1.208,0.729 true 1.802,0.688 2.24,1.177 2.24,1.177 2.042,1.427 true 0.792,0.396 0.979,0.563 0.188,0.167 10 true *a 2.271,1.094 2.448,1.229 0.177,0.135 10 true *b
*a Clamp
*b Guide


Engage the guides to install the front side member bracket sub-assembly LH.


b.

Install the 4 bolts.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


c.

Engage the clamp.


Hide 57013C 7.INSTALL FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

a.
B501045

Engage the guides to install the front side member bracket sub-assembly RH.


b.

Install the 4 bolts.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


Hide 52131A 8.INSTALL FRONT BUMPER REINFORCEMENT

a.
B558020

Engage the guides to install the front bumper reinforcement.


b.

Install the 6 bolts.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


c.
B558019

Engage the wire harness clamps.


Hide 52618 9.INSTALL LOWER FRONT BUMPER ABSORBER

a.
B557776C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guides to install the lower front bumper absorber as shown in the illustration.


Hide 52611 10.INSTALL FRONT BUMPER ENERGY ABSORBER

a.
B557777C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guides to install the front bumper energy absorber as shown in the illustration.


Hide 16561C 11.INSTALL NO. 1 RADIATOR TO SUPPORT SEAL

a.
B557778C01
0,0 0,0 false
V113147

Install in this Direction


Install the No. 1 radiator to support seal as shown in the illustration.


b.
B557741

Install the 2 clips.


c.

Engage the wire harness clamp.


Hide 53117C 12.INSTALL NO. 1 RADIATOR GRILLE RETAINER

a.
B474008C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the No. 1 radiator grille retainer as shown in the illustration.


Hide 52536 13.INSTALL FRONT BUMPER SIDE RETAINER LH

a.
B474001C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw to install the front bumper side retainer LH as shown in the illustration.


b.
B473999C01
1.198,1.01 1.396,1.188 0.198,0.177 10 true *a 2.583,1.615 2.792,1.771 0.208,0.156 10 true *b
*a Bolt
*b Screw


Install the screw.


c.

Install the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 52535 14.INSTALL FRONT BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52116A 15.INSTALL FRONT BUMPER SIDE SUPPORT LH

a.
B558014

Install the grommet.


b.

Clean the front bumper lower cover surface.

i.

Remove the double-sided tape from the front bumper lower cover.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Remove the release paper from a new front bumper side support LH.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



d.
B591175C02
0,0 0,0 false
V100155

Double-sided Tape


Engage the guides to install the front bumper side support LH.


e.

Install the screw.


f.

Press the double-sided tape area of the front bumper side support LH.


Hide 52115A 16.INSTALL FRONT BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 53121H 17.INSTALL NO. 1 RADIATOR GRILLE MOULDING

a.

Engage the guides to install the No. 1 radiator grille moulding.

B558012


b.

Install the 14 clips and 3 screws.

B558011


Hide 53127B 18.INSTALL NO. 7 RADIATOR GRILLE MOULDING

a.
B558010

Engage the hook and claws to install the No. 7 radiator grille moulding.


Hide 53125D 19.INSTALL NO. 5 RADIATOR GRILLE MOULDING

a.
B558009C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw to install the No. 5 radiator grille moulding as shown in the illustration.


b.

Install the screw.


Hide 75310A 20.INSTALL RADIATOR GRILLE EMBLEM ASSEMBLY

Hide 52129B 21.INSTALL FRONT BUMPER LOWER COVER

a.
B558007

Install the 6 grommets.


b.

Engage the guides and claws to install the front bumper lower cover.

B558006


c.
B558005

Install the 2 clips and 4 outside moulding retainers.


Hide 52146C 22.INSTALL FRONT BUMPER SIDE STAY LH

a.
B454130

Engage the claws to install the front fender liner retainer.


b.
B558004

Engage the claws to install the front bumper side stay LH.


c.
B558003

Install the screw and clip.


Hide 52145H 23.INSTALL FRONT BUMPER SIDE STAY RH

HINT:

Use the same procedure as for the LH side.


Hide 53102A 24.INSTALL LOWER RADIATOR GRILLE SUB-ASSEMBLY

a.
B558002

Install the 2 nuts.


b.

Engage the guides and claws to install the lower radiator grille sub-assembly.

B558001


c.

Install the 4 screws.

B558000


Hide 52676A 25.INSTALL NO. 1 FRONT BUMPER SIDE SUPPORT LH

a.
B557999

Engage the claw to install the No. 1 front bumper side support LH.


b.

Install the screw.


Hide 52675B 26.INSTALL NO. 1 FRONT BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 52128B 27.INSTALL FRONT BUMPER HOLE COVER LH

a.
B557998

Engage the claws to install the front bumper hole cover LH.


b.

Install the screw.


Hide 52127D 28.INSTALL FRONT BUMPER HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 82119C 29.INSTALL NO. 5 ENGINE ROOM WIRE

a.

Engage the clamps to install the No. 5 engine room wire.

B557997


Hide 81220 30.INSTALL FOG LIGHT ASSEMBLY LH

Hide 81210A 31.INSTALL FOG LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.