Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM (for eCall with Single Knob Type Radio and Display) › from 2022.01
RM32K0E _56 Audio / Visual / Telematics _084041 TELEMATICS _0524469 TELEMATICS SYSTEM(for eCall with Single Knob Type Radio and Display) C

TELEMATICS  TELEMATICS SYSTEM(for eCall with Single Knob Type Radio and Display)  B15A804  DCM System Internal Failure  B15A846  DCM Calibration / Parameter Memory Failure  


DESCRIPTION

This DTC is stored when an internal circuit malfunction is detected by the telephone transceiver assembly self check.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15A804 DCM System Internal Failure Telephone transceiver assembly internal malfunction Telephone transceiver assembly
B15A846 DCM Calibration / Parameter Memory Failure Telephone transceiver assembly internal malfunction Telephone transceiver assembly

CAUTION / NOTICE / HINT

NOTICE:
·

Regardless of whether DTC B15A804 or B15A846 has been output as a present or history DTC, the telephone transceiver assembly should be replaced.

·

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Telematics System.

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for eCall with Single Knob Type Radio and Display)>PRECAUTION

·

When replacing the telephone transceiver assembly, make sure to replace it with a new one.

·

Before replacing the telephone transceiver assembly, refer to Service Bulletin.



PROCEDURE

1.REPLACE TELEPHONE TRANSCEIVER ASSEMBLY
a.

Replace the telephone transceiver assembly with a new one.

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS TRANSCEIVER>REMOVAL


Result:
Proceed to
NEXT



NEXT