Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RECEIVER › 2016.10–2019.09
RM32H0E _53 Suspension _059606 TIRE PRESSURE MONITORING _0292311 TIRE PRESSURE WARNING RECEIVER A

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING RECEIVER  INSTALLATION  


PROCEDURE

Hide 897B0 1.INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:
·

Do not drop, strike or otherwise subject the tire pressure warning ECU and receiver to impact.

·

If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.



a.
B458209C01
2.927,0.583 3.198,0.823 0.271,0.24 12 false *A 2.938,1.208 3.229,1.427 0.292,0.219 12 false *B
*A for Type A
*B for Type B


Connect the connector.


b.

Engage the 2 guides and install the tire pressure warning ECU and receiver with the bolt.

Torque:
for Type A : 8.0 N*m (82 kgf*cm, 71 in.*lbf)
for Type B : 13 N*m (133 kgf*cm, 10 ft.*lbf)


Hide 64740C 2.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH