88280A
1.INSTALL CLUTCH SWITCH ASSEMBLY (for LHD)
Install the clutch switch assembly to the clutch pedal support sub-assembly with the nut.
Insert the protrusion of the clutch switch assembly into the hole in the clutch pedal support sub-assembly.
To prevent damage to the clutch switch assembly, make sure not to rotate it during installation.
Connect the connector to the clutch switch assembly.
88280A
2.INSTALL CLUTCH SWITCH ASSEMBLY (for RHD)
Install the clutch switch assembly to the clutch pedal support sub-assembly with the nut.
Insert the protrusion of the clutch switch assembly into the hole in the clutch pedal support sub-assembly.
To prevent damage to the clutch switch assembly, make sure not to rotate it during installation.
Connect the connector to the clutch switch assembly.
87211
3.INSTALL NO. 1 AIR DUCT
4.INSPECT CLUTCH START SYSTEM