86652E
1.INSTALL PRE-COLLISION CITY BUZZER
Connect the connector.
Engage the clamp to install the pre-collision city buzzer.
If the pre-collision city buzzer has been struck or dropped, replace it with a new one.
Make sure to install the pre-collision city buzzer in the correct direction.
55085
2.INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY
86140A
3.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)
55521C
4.INSTALL STEREO OPENING COVER WITH BRACKET (w/ Cover)
86120
5.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)
55670A
6.INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY