Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER (for Radio and Display Type) › 2016.10–2019.09
RM32H0E _56 Audio / Visual / Telematics _060227 AUDIO / VIDEO _0298049 RADIO RECEIVER(for Radio and Display Type) A

AUDIO / VIDEO  RADIO RECEIVER(for Radio and Display Type)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 86212C 1.INSTALL NO. 2 RADIO RECEIVER BRACKET

a.

Install the No. 2 radio receiver bracket with the 2 screws to the radio and display receiver assembly.


Hide 86211J 2.INSTALL NO. 1 RADIO RECEIVER BRACKET

a.

Install the No. 1 radio receiver bracket with the 2 screws to the radio and display receiver assembly.


Hide 86140A 3.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

a.

Connect each connector.


b.
E362287C01
0,0 0,0 false
V113147

Install in this Direction


Engage the clips and claws to install the radio and display receiver assembly with bracket as shown in the illustration.


c.

Install the 4 screws.


Hide 55670A 4.INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY

Hide 55406B 5.INSTALL INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY

Hide 55470 6.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY