Home › Engine / Hybrid System › 3ZR-FAE (ENGINE CONTROL) › KNOCK SENSOR
RM32H0E _51 Engine / Hybrid System _059607 3ZR-FAE ENGINE CONTROL _0293880 KNOCK SENSOR A

3ZR-FAE ENGINE CONTROL  KNOCK SENSOR  REMOVAL  


PROCEDURE

Hide 89615 2.REMOVE KNOCK SENSOR

a.
A393511

Disconnect the knock sensor connector.


b.
A393512

Remove the bolt and knock sensor from the cylinder block sub-assembly.

NOTICE:

If the knock sensor has been struck or dropped, replace it.