Home › Engine / Hybrid System › 3ZR-FAE (ENGINE CONTROL) › MANIFOLD ABSOLUTE PRESSURE SENSOR
RM32H0E _51 Engine / Hybrid System _059607 3ZR-FAE ENGINE CONTROL _0293881 MANIFOLD ABSOLUTE PRESSURE SENSOR A

3ZR-FAE ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89421 1.INSTALL VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR)

a.
A393516C01
1.552,1.115 1.469,0.698 1.469,0.698 1.302,0.698 false 2.26,1.104 2.344,0.688 2.344,0.688 2.51,0.688 false 1.906,4.219 1.906,3.729 true 1.115,0.604 1.427,0.802 0.313,0.198 10 false *a 2.552,0.604 2.865,0.802 0.313,0.198 10 false *b 1.833,4.229 2.042,4.417 0.208,0.188 10 true *1
*1 Vacuum Hose
*a Protrusion
*b Hole


Align the protrusion of the vacuum sensor bracket with the hole of vacuum sensor assembly (manifold absolute pressure sensor).


b.

Install the vacuum sensor assembly (manifold absolute pressure sensor) with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

If the vacuum sensor assembly (manifold absolute pressure sensor) has been struck or dropped, replace it.



c.

Connect the vacuum hose and vacuum sensor assembly (manifold absolute pressure sensor) connector to the vacuum sensor assembly (manifold absolute pressure sensor).