Home › Engine / Hybrid System › 8NR-FTS (INTAKE / EXHAUST) › WATER PUMP
RM32H0E _51 Engine / Hybrid System _059908 8NR-FTS INTAKE / EXHAUST _0293889 WATER PUMP A

8NR-FTS INTAKE / EXHAUST  WATER PUMP  INSTALLATION  


PROCEDURE

Hide 161B0 1.INSTALL ELECTRIC WATER PUMP ASSEMBLY

a.

Install the electric water pump assembly to the fan shroud with the 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 16552C 2.CONNECT NO. 2 INTERCOOLER COOLING WATER HOSE

a.

Connect the No. 2 intercooler cooling water hose to the electric water pump assembly and slide the clip to secure it.


Hide 16555C 3.CONNECT NO. 5 INTERCOOLER COOLING WATER HOSE

a.

Connect the No. 5 intercooler cooling water hose to the electric water pump assembly and slide the clip to secure it.


b.

Connect the electric water pump assembly connector.


Hide 4.ADD COOLANT (for Intercooler)

Hide 51441 6.INSTALL NO. 1 ENGINE UNDER COVER