Home › Engine / Hybrid System › 8NR-FTS (INTAKE / EXHAUST) › RADIATOR
RM32H0E _51 Engine / Hybrid System _059908 8NR-FTS INTAKE / EXHAUST _0293890 RADIATOR A

8NR-FTS INTAKE / EXHAUST  RADIATOR  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 2.DRAIN COOLANT (for Intercooler)

Hide 16640 3.REMOVE INTERCOOLER RESERVE TANK ASSEMBLY

a.
A393026

Slide the clip and disconnect the No. 1 intercooler cooling water hose from the intercooler reserve tank assembly.


b.
A393785

Slide the clip and disconnect the No. 2 intercooler cooling water hose from the intercooler reserve tank assembly.


c.
A393027

Disengage the 2 claws and remove the intercooler reserve tank assembly from the fan shroud assembly.


Hide 4.REMOVE RADIATOR ASSEMBLY AND FAN SHROUD ASSEMBLY

Hide 16550 5.REMOVE INTERCOOLER COOLING RADIATOR ASSEMBLY

a.
A396732

Disengage the 2 claws.


b.
A393029

Slide the clip and disconnect the No. 6 intercooler cooling water hose from the intercooler cooling radiator assembly.


c.
A393030

Remove the intercooler cooling radiator assembly from the radiator assembly and fan shroud assembly.


Hide 16556C 6.REMOVE NO. 6 INTERCOOLER COOLING WATER HOSE

a.
A394546

Slide the clip and disconnect the No. 6 intercooler cooling water hose from water hose joint.


b.

Disengage the clamp to disconnect the No. 6 intercooler cooling water hose from the fan shroud assembly.


Hide 16555C 7.REMOVE NO. 5 INTERCOOLER COOLING WATER HOSE

a.
A394547

Slide the clip and disconnect the No. 5 intercooler cooling water hose from water hose joint.


b.

Disengage the 2 clamps to disconnect the No. 5 intercooler cooling water hose from the fan shroud.