Home › Engine / Hybrid System › 8NR-FTS (FUEL) › FUEL PUMP (for 2WD)
RM32H0E _51 Engine / Hybrid System _059909 8NR-FTS FUEL _0293903 FUEL PUMP(for 2WD) A

8NR-FTS FUEL  FUEL PUMP(for 2WD)  REASSEMBLY  


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP

HINT:

Perform "Inspection After Repair" after replacing the fuel pump.

Click hereEngine / Hybrid System>8NR-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.
A288172C01
2.052,0.75 2.5,0.75 false 2.063,0.604 2.25,0.333 2.25,0.333 2.5,0.333 false 2.563,0.281 2.875,0.438 0.313,0.156 10 *1 2.563,0.688 2.875,0.844 0.313,0.156 10 *2
*1 O-ring
*2 Fuel Pump Spacer


Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.


b.

Connect the fuel pump harness connector to install the fuel pump harness to the fuel pump.


c.

Engage the 5 claws to install the fuel pump to the fuel filter.

NOTICE:
·

Make sure that the O-ring is not cut or pinched during the installation.

·

Engage the claws securely.

·

Do not remove the suction filter.




d.

Engage the 2 claws to install the No. 1 fuel suction support to the fuel filter.


e.

Engage the 2 claws and install the fuel filter and the fuel pump to the No. 1 fuel sub-tank.

NOTICE:

Do not apply excessive force to the tube or No. 1 fuel suction support.



f.
A354418

Engage the clamp and claw, and connect the fuel pump filter hose while aligning it with the installation position of the No. 1 fuel sub-tank.


g.

Connect the fuel pump harness connector.