Home › Engine / Hybrid System › 8NR-FTS (FUEL) › FUEL PUMP (for AWD)
RM32H0E _51 Engine / Hybrid System _059909 8NR-FTS FUEL _0293905 FUEL PUMP(for AWD) A

8NR-FTS FUEL  FUEL PUMP(for AWD)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
A217141C14
1.208,0.938 1.073,0.76 1.073,0.76 0.896,0.76 false 0.688,0.708 1,0.865 0.313,0.156 10 false *a
*a Tube


·

Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.

·

When replacing the fuel filter, replace it together with the fuel suction plate sub-assembly.



PROCEDURE

Hide 23221 2.REMOVE FUEL PUMP

a.
A393050

Disconnect the fuel pump harness connector.


b.
A397500

Disengage the clamp and claw, disconnect the fuel pump filter hose from the No. 1 fuel sub-tank.


c.

Using a screwdriver with its tip wrapped with protective tape, disconnect the fuel pump filter hose from the No. 1 fuel sub-tank.

NOTICE:

Do not damage the fuel sub-tank, fuel filter and jet pump.



d.
A288192C02
2.75,0.354 3.01,0.354 false 2.75,1.063 3.01,1.063 false 3.052,0.292 3.365,0.448 0.313,0.156 10 *1 3.083,1.01 3.396,1.167 0.313,0.156 10 *2
*1 Tube
*2 Fuel Sub-tank


Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the fuel filter and fuel pump from the No. 1 fuel sub-tank.

NOTICE:

Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

Click hereEngine / Hybrid System>8NR-FTS (FUEL)>FUEL SYSTEM>PRECAUTION



e.
A110138C11
2.177,0.406 2.573,0.406 false 1.729,1.854 2.479,1.854 false 2.635,0.344 2.948,0.5 0.313,0.156 10 *1 2.563,1.792 2.875,1.948 0.313,0.156 10 *2
*1 Jet Pump
*2 O-ring


Remove the O-ring from the jet pump.


f.
A159103

Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the No. 1 fuel suction support from the fuel filter.


g.
A288169C07
2.75,2.75 2.5,2.75 false 0.667,1.5 0.417,1.5 false 3.177,0.375 2.927,0.375 false 0.25,1.417 0.552,1.583 0.302,0.167 10 false *1 2.823,2.656 3.135,2.813 0.313,0.156 10 false *2 3.229,0.292 3.427,0.552 0.198,0.26 10 false *a
*1 Fuel Filter
*2 Suction Filter
*a Tube


Using a screwdriver with its tip wrapped with protective tape, disengage the 5 claws, and remove the fuel pump from the fuel filter.

NOTICE:
·

Do not damage the fuel filter or suction filter.

·

Do not remove the suction filter from the fuel pump.

·

Do not do anything which may separate the tube from either the fuel suction plate sub-assembly or fuel filter, such as applying excessive force to the tube.

Click hereEngine / Hybrid System>8NR-FTS (FUEL)>FUEL SYSTEM>PRECAUTION




h.
A283925

Disconnect the fuel pump harness connector to remove the fuel pump harness from the fuel pump.


i.
A292649C01
2.219,0.813 2.583,0.813 false 2.229,0.646 2.448,0.448 2.448,0.448 2.583,0.448 false 0.927,4.021 1.115,4.198 1.115,4.198 1.25,4.198 false 2.656,0.396 2.969,0.552 0.313,0.156 10 *1 2.656,0.76 2.969,0.917 0.313,0.156 10 *2 1.865,1.698 2.177,1.854 0.313,0.156 10 *a 1.927,2.271 2.24,2.427 0.313,0.156 10 *a 1.302,4.135 1.615,4.292 0.313,0.156 10 *1
*1 O-ring
*2 Fuel Pump Spacer
*a 5.0 mm (0.197 in.)


Remove the O-ring and fuel pump spacer from the fuel pump.

NOTICE:

Be careful not to damage the sealing surface.


HINT:

If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm (0.0394 in.) diameter) that is formed as shown in the illustration.