Home › Engine / Hybrid System › 8NR-FTS (FUEL) › FUEL PUMP (for AWD)
RM32H0E _51 Engine / Hybrid System _059909 8NR-FTS FUEL _0293905 FUEL PUMP(for AWD) A

8NR-FTS FUEL  FUEL PUMP(for AWD)  REASSEMBLY  


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP

HINT:

Perform "Inspection After Repair" after replacing the fuel pump.

Click hereEngine / Hybrid System>8NR-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.


b.

Connect the fuel pump harness connector to install the fuel pump harness to the fuel pump.


c.

Engage the 5 claws to install the fuel pump to the fuel filter.

NOTICE:
·

Make sure that the O-ring is not cut or pinched during the installation.

·

Engage the claws securely.

·

Do not remove the suction filter.




d.

Engage the 2 claws to install the No. 1 fuel suction support to the fuel filter.


e.

Apply gasoline to a new O-ring. Then install the O-ring to the jet pump.


f.

Engage the 2 claws and install the fuel filter and the fuel pump to the No. 1 fuel sub-tank.

NOTICE:

Do not apply excessive force to the tube or No. 1 fuel suction support.



g.
A395458

Engage the clamp and claw, and connect the fuel pump filter hose while aligning it with the installation position of the No. 1 fuel sub-tank.


h.

Connect the fuel pump harness connector.