Use the same procedure for LHD and RHD vehicles.
The procedure described below is for the LHD vehicles.
55475E
1.INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER GARNISH
|
Install in this Direction |
Engage the claws to install the instrument cluster finish panel center garnish as shown in the illustration.
55475E
2.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
Install in this Direction |
Engage the claws to install the instrument cluster finish panel garnish as shown in the illustration.
55619F
3.INSTALL NO. 2 CONSOLE BOX CUP HOLDER
55618A
4.INSTALL CONSOLE BOX CUP HOLDER
58804A
5.INSTALL CONSOLE UPPER PANEL SUB-ASSEMBLY
33504F
6.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
33504F
7.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)
55440D
8.INSTALL INSTRUMENT PANEL BOX ASSEMBLY
55434B
9.INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL
55470
10.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
55606
11.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62112
12.INSTALL COWL SIDE TRIM BOARD LH
67914
13.INSTALL FRONT DOOR SCUFF PLATE LH