Home › Vehicle Interior › LIGHTING (INT) › AMBIENT LIGHT
RM32H0E _58 Vehicle Interior _060018 LIGHTING (INT) _0294067 AMBIENT LIGHT A

LIGHTING (INT)  AMBIENT LIGHT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure described below is for the LHD vehicles.

·

Use the same procedure as for the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 74232 1.REMOVE FRONT ARMREST BASE UPPER PANEL (for Driver Side)

Hide 74232 2.REMOVE FRONT ARMREST BASE UPPER PANEL (for Front Passenger Side)

Hide 69284C 3.REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

Hide 67602 4.REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

Hide 81080S 5.REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY

E357034C01
0.281,1.104 0.281,0.771 true 1.083,1.75 1.083,1.417 true 1.448,1.938 1.448,1.604 true 2.333,2 2,1.813 true 0.896,0.667 1.229,0.667 true 1.26,0.552 1.51,0.719 0.25,0.167 10 true *a 0.208,1.104 0.438,1.271 0.229,0.167 10 true *b 1.021,1.75 1.25,1.917 0.229,0.167 10 true *b 1.354,1.917 1.583,2.083 0.229,0.167 10 true *b 2.354,1.896 2.583,2.063 0.229,0.167 10 true *b
*a Clamp
*b Guide


a.

Using a clip remover, disengage the clamp and guides to disconnect the wire harness.


b.

Remove the 2 screws.


c.

Disengage the claws to remove the No. 1 interior illumination light assembly.