Home › Engine / Hybrid System › 3ZR-FAE (LUBRICATION) › OIL PRESSURE SWITCH
RM32H0E _51 Engine / Hybrid System _060036 3ZR-FAE LUBRICATION _0294093 OIL PRESSURE SWITCH A

3ZR-FAE LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A085603C09
1.198,0.313 1.51,0.469 0.313,0.156 10 *a
*a Adhesive 1344


Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



b.

Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine within 1 hour of installation.



c.

Connect the engine oil pressure switch assembly connector.


Hide 51443C 3.INSTALL REAR ENGINE UNDER COVER RH