Use the same procedure for RHD and LHD vehicles.
The following procedure is for LHD vehicles.
73350C
1.DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
2.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
72693
3.REMOVE REAR SEAT CUSHION LOCK HOOK
73705B
4.REMOVE CROSS ANCHOR BRACKET SUB-ASSEMBLY (for LH Side)
Disengage the clamps.
Remove the 2 bolts and cross anchor bracket sub-assembly.
73705B
5.REMOVE CROSS ANCHOR BRACKET SUB-ASSEMBLY (for RH Side)
Disengage the clamps.
Remove the 2 bolts and cross anchor bracket sub-assembly.