Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › ENGINE OIL TEMPERATURE SENSOR
RM32H0E _51 Engine / Hybrid System _059353 8NR-FTS ENGINE CONTROL _0295073 ENGINE OIL TEMPERATURE SENSOR A

8NR-FTS ENGINE CONTROL  ENGINE OIL TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL RH

Hide 51443C 2.REMOVE REAR ENGINE UNDER COVER RH

Hide 89429F 3.REMOVE ENGINE OIL TEMPERATURE SENSOR

a.
A392721

Disconnect the engine oil temperature sensor connector.


b.
A392722N01
1.198,0.688 1.531,0.688 true 0.885,0.604 1.281,0.802 0.396,0.198 10 true SST

Using SST, remove the engine oil temperature sensor from the oil pump relief valve housing assembly.

SST
09817-33191  

NOTICE:

If the engine oil temperature sensor has been struck or dropped, replace it.



c.

Remove the gasket from the engine oil temperature sensor.