Home › Engine / Hybrid System › 8NR-FTS (STARTING) › ENGINE SWITCH (for RHD)
RM32H0E _51 Engine / Hybrid System _060199 8NR-FTS STARTING _0295156 ENGINE SWITCH(for RHD) A

8NR-FTS STARTING  ENGINE SWITCH(for RHD)  INSTALLATION  


PROCEDURE

Hide 89611 1.INSTALL ENGINE SWITCH

a.

Engage the 2 claws and install the engine switch to the stater switch bezel.


Hide 55012A 3.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

Hide 55410C 4.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 55470 5.INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

Hide 55404D 6.INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY