28800
1.INSTALL BATTERY
Perform "clear the integrated current value", "switch battery type" after replacing the battery.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
Install the battery to the vehicle.
Install the No. 2 battery clamp with the bolt.
Install the battery insulator to the battery.
Connect the cable to the positive (+) battery terminal and engage the clamp.
Tighten the nut.
Engage the 2 claws and install the fusible link cover.
2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Connect the cable to the negative (-) battery terminal and tighten the nut.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
3.PERFORM INITIALIZATION
Perform "clear the integrated current value", "switch battery type" after replacing the battery.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION