Home › General › MAINTENANCE › 3ZR-FAE BATTERY › 2016.10–2020.08
RM32H0E _V1 General _059503 MAINTENANCE _0295273 3ZR-FAE BATTERY A

MAINTENANCE  3ZR-FAE BATTERY  INSTALLATION  


PROCEDURE

Hide 28800 1.INSTALL BATTERY

HINT:

Perform "clear the integrated current value", "switch battery type" after replacing the battery.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


a.

Install the battery to the vehicle.


b.
A394406

Install the No. 2 battery clamp with the bolt.

Torque:
15.4 N*m (157 kgf*cm, 11 ft.*lbf)


c.

Install the battery insulator to the battery.


d.

Connect the cable to the positive (+) battery terminal and engage the clamp.


e.

Tighten the nut.

Torque:
5.6 N*m (57 kgf*cm, 50 in.*lbf)


f.
A387997

Engage the 2 claws and install the fusible link cover.


Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

a.

Connect the cable to the negative (-) battery terminal and tighten the nut.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



Hide 3.PERFORM INITIALIZATION

a.

Perform "clear the integrated current value", "switch battery type" after replacing the battery.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION