Use the same procedure for RHD and LHD vehicles.
The following procedure is for the LHD vehicles.
88650N
1.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
for VALEO Made:
Connect each connector.
|
Install in this Direction |
Engage the guides to install the air conditioning amplifier assembly as shown in the illustration.
Install the screw.
for DENSO Made:
Connect each connector.
| *a | Rib of Air Conditioning Amplifier Assembly |
| *b | Rib of Air Conditioner Unit Assembly |
| *c | Align |
|
Install in this Direction |
Align the lower part of the air conditioning amplifier assembly with the rib of the air conditioner unit assembly and engage the guide as shown in the illustration.
Move the air conditioning amplifier assembly in each direction shown in the illustration to check that the guide is securely engaged.
Install the screw.
55606
2.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62112
3.INSTALL COWL SIDE TRIM BOARD LH
67914
4.INSTALL FRONT DOOR SCUFF PLATE LH