Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER › 2016.10–2019.09
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298064 FRONT BUMPER A

EXTERIOR PANELS / TRIM  FRONT BUMPER  DISASSEMBLY  


PROCEDURE

Hide 53111 1.REMOVE RADIATOR GRILLE

Hide 89341M 2.REMOVE FRONT SIDE ULTRASONIC SENSOR (w/ Simple Intelligent Parking Assist System)

Hide 89341K 3.REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89347B 4.REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89341L 5.REMOVE FRONT SIDE ULTRASONIC SENSOR RETAINER (w/ Simple Intelligent Parking Assist System)

Hide 89347C 6.REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 89347D 7.REMOVE FRONT CENTER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

Hide 82119C 8.REMOVE NO. 5 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)

a.

w/ Simple Intelligent Parking Assist System:

i.

Disengage the clamps to remove the No. 5 engine room wire.

B454123



b.

w/o Simple Intelligent Parking Assist System:

i.

Disengage the clamps to remove the No. 5 engine room wire.

B458894



Hide 85354 9.REMOVE HEADLIGHT WASHER COVER LH (w/ Headlight Cleaner System)

Hide 85353 10.REMOVE HEADLIGHT WASHER COVER RH (w/ Headlight Cleaner System)

HINT:

Use the same procedure as for the LH side.


Hide 85208A 11.REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

Hide 85207A 12.REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:

Use the same procedure as for the LH side.


Hide 85271 13.REMOVE WASHER HOSE (w/ Headlight Cleaner System)

a.

Disengage the clamps to remove the washer hose.

B454122


Hide 52128C 14.REMOVE FRONT BUMPER EXTENSION LH

a.
B454124

Disengage the claws and guide to remove the front bumper extension LH.


Hide 52127D 15.REMOVE FRONT BUMPER EXTENSION RH

HINT:

Use the same procedure as for the LH side.


Hide 81220 16.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

a.
B454125

Remove the 2 screws.


b.

Disengage the guide to remove the fog light assembly LH.


Hide 81210A 17.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 81482C 18.REMOVE FOG LIGHT COVER LH (w/ Fog Light)

a.
B454126

Remove the 3 screws and fog light cover LH.


Hide 81481E 19.REMOVE FOG LIGHT COVER RH (w/ Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 81482C 20.REMOVE FOG LIGHT COVER LH (w/o Fog Light)

a.
B454127

Remove the 3 screws and fog light cover LH.


Hide 81481E 21.INSTALL FOG LIGHT COVER RH (w/o Fog Light)

HINT:

Use the same procedure as for the LH side.


Hide 52146B 22.REMOVE FRONT BUMPER SIDE MOUNTING BRACKET LH

a.
B454128

Remove the screw and clip.


b.
B454129C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the front bumper side mounting bracket LH.


Hide 52145C 23.REMOVE FRONT BUMPER SIDE MOUNTING BRACKET RH

HINT:

Use the same procedure as for the LH side.


Hide 53879H 24.REMOVE FRONT FENDER LINER RETAINER

a.
B454130

Disengage the claws to remove the front fender liner retainer.

HINT:

Use the same procedure for the opposite side.



Hide 52128B 25.REMOVE FRONT BUMPER HOLE COVER

a.
B454131

Disengage the claws.


b.
B454132

Disengage the hook to remove the front bumper hole cover.


Hide 52114A 26.REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET

a.

for Extension Mounting Bracket Type A:

i.
B454133

Remove the 2 screws.


ii.
B454134C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the front bumper extension mounting bracket as shown in the illustration.



b.

for Extension Mounting Bracket Type B:

i.
B458895

Remove the 2 screws.


ii.
B458896C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the front bumper extension mounting bracket as shown in the illustration.



Hide 53114C 27.REMOVE INNER RADIATOR GRILLE

a.
B454137C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the inner radiator grille.


Hide 52129B 28.REMOVE FRONT BUMPER LOWER COVER

a.
B454138C01
0.813,0.542 1.021,0.729 0.208,0.188 10 true *a 0.448,0.656 0.656,0.844 0.208,0.188 10 true *a 0.229,0.854 0.438,1.042 0.208,0.188 10 true *a 0.063,0.979 0.271,1.167 0.208,0.188 10 true *a 0.063,1.625 0.271,1.813 0.208,0.188 10 false *b 0.271,1.906 0.479,2.094 0.208,0.188 10 false *c 0.573,1.833 0.781,2.021 0.208,0.188 10 false *c 1,1.781 1.208,1.969 0.208,0.188 10 false *c 1.438,1.771 1.646,1.958 0.208,0.188 10 false *c 1.865,1.76 2.073,1.948 0.208,0.188 10 false *c 2.719,1.813 2.927,2 0.208,0.188 10 false *c 3,1.885 3.208,2.073 0.208,0.188 10 false *c 2.292,1.771 2.5,1.958 0.208,0.188 10 false *c 2.458,0.531 2.667,0.719 0.208,0.188 10 true *a 2.875,0.667 3.083,0.854 0.208,0.188 10 true *a 3.073,0.844 3.281,1.031 0.208,0.188 10 true *a 3.208,1 3.417,1.188 0.208,0.188 10 true *a 3.198,1.646 3.406,1.833 0.208,0.188 10 false *b
*a Outside Moulding Retainer
*b Clip
*c Grommet


Remove the 8 grommets.


b.

Remove the 2 clips and 8 outside moulding retainers.


c.
B454139

Disengage the claws and guides to remove the front bumper lower cover.


Hide 53117C 29.REMOVE NO. 1 RADIATOR GRILLE RETAINER

a.
B454140C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the No. 1 radiator grille retainer as shown in the illustration.


Hide 16561C 30.REMOVE NO. 1 RADIATOR TO SUPPORT SEAL

a.
B454141

Disengage the wire harness clamp and remove the 2 clips.


b.
B454142C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the No. 1 radiator to support seal as shown in the illustration.


Hide 52611 31.REMOVE FRONT BUMPER ENERGY ABSORBER

a.
B454143C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the front bumper energy absorber as shown in the illustration.


Hide 52618 32.REMOVE LOWER FRONT BUMPER ABSORBER

a.
B454144C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the lower front bumper absorber as shown in the illustration.


Hide 52131A 33.REMOVE FRONT BUMPER REINFORCEMENT

a.
B454145

Disengage the wire harness clamps.


b.

Remove the 6 bolts and front bumper reinforcement.


Hide 57014A 34.REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH

a.
B454146

Remove the 4 bolts and front side member bracket sub-assembly LH.


Hide 57013C 35.REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52132A 36.REMOVE NO. 2 FRONT BUMPER REINFORCEMENT

a.
B454147

Remove the 2 nuts and No. 2 front bumper reinforcement.


Hide 52134G 37.REMOVE FRONT BUMPER BRACKET LH

a.
B454148

Remove the 4 bolts and front bumper bracket LH.


Hide 52133F 38.REMOVE FRONT BUMPER BRACKET RH

HINT:

Use the same procedure as for the LH side.


Hide 16595B 39.REMOVE NO. 1 RADIATOR AIR GUIDE LH

a.
B461473C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Disengage the claw and guide to remove the No. 1 radiator air guide LH as shown in the illustration.


Hide 16593B 40.REMOVE NO. 1 RADIATOR AIR GUIDE RH

a.
B461474C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Disengage the claw and guide to remove the No. 1 radiator air guide RH as shown in the illustration.


Hide 52536 41.REMOVE FRONT BUMPER SIDE RETAINER LH

a.
B454151C01
0.875,1.135 1.125,1.333 0.25,0.198 10 true *a 2.135,1.656 2.385,1.854 0.25,0.198 10 true *b
*a Bolt
*b Screw


Remove the bolt.


b.

Remove the screw.


c.
B454152C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claw to remove the front bumper side retainer LH as shown in the illustration.


Hide 52535 42.REMOVE FRONT BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.