Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR (for Front) › 2016.10–2019.09
RM32H0E _56 Audio / Visual / Telematics _060571 PARK ASSIST / MONITORING _0298104 ULTRASONIC SENSOR(for Front) A

PARK ASSIST / MONITORING  ULTRASONIC SENSOR(for Front)  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT BUMPER ASSEMBLY

Hide 89341M 2.REMOVE FRONT SIDE ULTRASONIC SENSOR (w/ Simple Intelligent Parking Assist System)

HINT:

The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


a.
E356964

Disconnect the connector.


b.
E356965C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the front side ultrasonic sensor as shown in the illustration.


Hide 89341K 3.REMOVE FRONT CORNER ULTRASONIC SENSOR

HINT:

The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


a.
E356966

Disconnect the connector.


b.
E356967C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the front corner ultrasonic sensor as shown in the illustration.


Hide 89341L 4.REMOVE FRONT CENTER ULTRASONIC SENSOR

HINT:

The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


a.
E356968

Disconnect the connector.


b.
E356969C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the front center ultrasonic sensor as shown in the illustration.


Hide 89347D 5.REMOVE FRONT SIDE ULTRASONIC SENSOR RETAINER (w/ Simple Intelligent Parking Assist System)

HINT:
·

Perform this procedure only when replacement of the front side ultrasonic sensor retainer is necessary.

·

When removing the front side ultrasonic sensor retainer, heat the front bumper assembly and front side ultrasonic sensor retainer using a heat light.

·

The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.



a.

Heat the front bumper assembly and front side ultrasonic sensor retainer using a heat light at the specified temperature for 3 to 5 minutes.

Heating Temperature:
Item Temperature
Front Bumper Assembly 40 to 60°C (104 to 140°F)
Front Side Ultrasonic Sensor Retainer


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.




b.
E356970

Remove the front side ultrasonic sensor retainer.


Hide 89347B 6.REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER

HINT:
·

Perform this procedure only when replacement of the front corner ultrasonic sensor retainer is necessary.

·

When removing the front corner ultrasonic sensor retainer, heat the front bumper assembly and front corner ultrasonic sensor retainer using a heat light.



a.

Heat the front bumper assembly and front corner ultrasonic sensor retainer using a heat light at the specified temperature for 3 to 5 minutes.

Heating Temperature:
Item Temperature
Front Bumper Assembly 40 to 60°C (104 to 140°F)
Front Corner Ultrasonic Sensor Retainer


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.




b.

Remove the front corner ultrasonic sensor retainer.

E356971


Hide 89347C 7.REMOVE FRONT CENTER ULTRASONIC SENSOR RETAINER

a.
E356972C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the front center ultrasonic sensor retainer as shown in the illustration.