76812A
1.REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH
|
Remove in this Direction |
Remove the 7 No. 1 outside moulding retainers and No. 2 back door outside garnish as shown in the illustration.
76822B
2.REMOVE BACK DOOR GARNISH SIDE PROTECTOR LH
Remove the back door garnish side protector LH.
76821B
3.REMOVE BACK DOOR GARNISH SIDE PROTECTOR RH
Use the same procedure as for the LH side.
76825
4.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for TMMT Made)
Remove the back door outside garnish protector.
76825
5.REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR (for TMC Made)
Remove the 2 back door outside garnish protectors.
76821
6.REMOVE BACK DOOR GARNISH MOULDING UPPER PROTECTOR (for TMMT Made)
Remove the back door garnish moulding upper protector.
76821
7.REMOVE BACK DOOR GARNISH MOULDING UPPER PROTECTOR (for TMC Made)
Remove the back door garnish moulding upper protector.
76824
8.REMOVE BACK DOOR GARNISH MOULDING PROTECTOR LH (for TMMT Made)
for Back Door Outside Garnish Side:
Remove the back door garnish moulding protector LH.
for No. 2 Back Door Outside Garnish Side:
Remove the back door garnish moulding protector LH.
76823
9.REMOVE BACK DOOR GARNISH MOULDING PROTECTOR RH (for TMMT Made)
Use the same procedure as for the LH side.
76824
10.REMOVE BACK DOOR GARNISH MOULDING PROTECTOR LH (for TMC Made)
Remove the back door garnish moulding protector LH.
76823
11.REMOVE BACK DOOR GARNISH MOULDING PROTECTOR RH (for TMC Made)
Use the same procedure as for the LH side.
76825D
12.REMOVE NO. 1 BACK DOOR OUTSIDE GARNISH PROTECTOR
Using the same procedure, remove every No. 1 back door outside garnish protector.
Remove the No. 1 back door outside garnish protector.
76818
13.REMOVE BACK DOOR OUTSIDE GARNISH PAD (for TMMT Made)
Using the same procedure, remove every back door outside garnish pad.
Remove the back door outside garnish pad.
14.REMOVE NO. 2 BACK DOOR OUTSIDE GARNISH PROTECTOR
Using the same procedure, remove every No. 2 back door outside garnish protector.
Remove the No. 2 back door outside garnish protector.
76822
15.REMOVE BACK DOOR GARNISH MOULDING LOWER PROTECTOR
Using the same procedure, remove every back door garnish moulding lower protector.
Remove the back door garnish moulding lower protector.
76819
16.REMOVE BACK DOOR OUTSIDE GARNISH SEAL
Using the same procedure, remove every back door outside garnish seal.
Remove the back door outside garnish seal.
75441E
17.REMOVE NO. 1 BACK DOOR NAME PLATE
75442A
18.REMOVE NO. 2 BACK DOOR NAME PLATE
75431A
19.REMOVE NO. 1 BACK DOOR EMBLEM