Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH
RM32H0E _58 Vehicle Interior _060784 THEFT DETERRENT / KEYLESS ENTRY _0298113 ENGINE HOOD COURTESY SWITCH A

THEFT DETERRENT / KEYLESS ENTRY  ENGINE HOOD COURTESY SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure described below is for the LHD vehicles.



PROCEDURE

Hide 1.REMOVE FRONT BUMPER ASSEMBLY

Hide 53579 2.REMOVE HOOD LOCK NUT CAP

a.
E357334C01
1.125,1.313 1.438,1.667 true 0.875,1.177 1.115,1.396 0.24,0.219 10 true *a
*a Protective Tape


Using a screwdriver with its tip wrapped in protective tape, remove the hood lock nut cap.


Hide 53510 3.REMOVE ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)

a.
E357333

Disconnect the connector.


b.
E357335

Remove the 2 bolts and hood lock bolt to separate the engine hood courtesy switch (hood lock assembly).


c.
E357336

Disengage the guide.


d.

Disconnect the hood lock control cable assembly to remove the hood courtesy switch (hood lock assembly).