Home › Drivetrain › K114 (MULTIDRIVE / CVT) › SHIFT LEVER
RM32H0E _52 Drivetrain _059616 K114 MULTIDRIVE / CVT _0298392 SHIFT LEVER A

K114 MULTIDRIVE / CVT  SHIFT LEVER  INSTALLATION  


PROCEDURE

Hide 33530F 1.INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY

C364059N01
0.969,1.958 1.125,2.156 0.156,0.198 10 true 1 2.313,0.5 2.469,0.698 0.156,0.198 10 true 2 1.031,0.448 1.188,0.646 0.156,0.198 10 true 3 2.271,1.979 2.427,2.177 0.156,0.198 10 true 4

a.

Temporarily install the floor shift shift lever assembly to the body with the 4 bolts.


b.

Fully tighten the 4 bolts in the order shown in the illustration.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


c.

Engage the 6 clamps to install the wire harness to the floor shift shift lever assembly.


d.

Connect the 2 connectors to the floor shift shift lever assembly.


Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C366437C01
0,0 0,0 false
V113147

Install in this Direction


Install the transmission control cable assembly to the floor shift shift lever assembly.

NOTICE:

Make sure that the transmission control cable assembly is securely locked.



b.
C366436C01
0,0 0,0 false
V113147

Install in this Direction


Connect the end of the transmission control cable assembly to the floor shift shift lever assembly.

NOTICE:
·

Before connecting the transmission control cable assembly, check that the park/neutral position switch and shift lever are in N.

·

Install the end of the transmission control cable assembly so that the lock piece faces the driver side.

·

Install the end of the transmission control cable assembly all the way to the base of the pin.




Hide 3.INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET

a.
C364055

Install the No. 1 console box mounting bracket to the vehicle body with the 2 bolts.


b.

Engage the 3 clamps to install the wire harness to the No. 1 console box mounting bracket.


Hide 86741A 5.INSTALL TELEMATICS TRANSCEIVER (w/ Telematics Transceiver)

Hide 33504F 7.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

Hide 8.INSTALL SHIFT LEVER CAP

a.

Engage the 2 claws to install the shift lever cap to the instrument panel ornament.