Home › Drivetrain › K313 (MULTIDRIVE / CVT) › REVOLUTION SENSOR
RM32H0E _52 Drivetrain _059624 K313 MULTIDRIVE / CVT _0299311 REVOLUTION SENSOR A

K313 MULTIDRIVE / CVT  REVOLUTION SENSOR  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51444A 2.REMOVE REAR ENGINE UNDER COVER LH

Hide 89413P 3.REMOVE TRANSMISSION REVOLUTION SENSOR (NIN)

a.
C265864

Disconnect the transmission revolution sensor (NIN) connector.


b.

Remove the bolt and transmission revolution sensor (NIN) from the continuously variable transaxle assembly.


c.

Remove the O-ring from the transmission revolution sensor (NIN).


Hide 89413M 4.REMOVE TRANSMISSION REVOLUTION SENSOR (NOUT)

a.
C265865

Disconnect the transmission revolution sensor (NOUT) connector.


b.

Remove the bolt and transmission revolution sensor (NOUT) from the continuously variable transaxle assembly.


c.

Remove the O-ring from the transmission revolution sensor (NOUT).