Home › Drivetrain › K313 (MULTIDRIVE / CVT) › TRANSMISSION CONTROL CABLE
RM32H0E _52 Drivetrain _059624 K313 MULTIDRIVE / CVT _0299314 TRANSMISSION CONTROL CABLE N

K313 MULTIDRIVE / CVT  TRANSMISSION CONTROL CABLE  ADJUSTMENT  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
·
C332327

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 33504F 2.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

Hide 3.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 4.ADJUST SHIFT LEVER POSITION

a.

for TMMT Made:

i.
C365196C02
2.188,1.146 2.5,1.333 true 1.677,1.594 1.667,1.25 true 2.521,1.26 2.719,1.427 0.198,0.167 10 true *1 1.615,1.594 1.792,1.771 0.177,0.177 10 true *2
*1 Adjuster Case
*2 Stopper


Turn the stopper of the adjuster case in the direction shown by the arrow.


ii.
C365197C02
1.583,0.75 1.927,1.031 true 2.323,1.042 2.667,1.323 true 2.677,1.25 2.875,1.427 0.198,0.177 10 true *1 1.396,0.646 1.573,0.813 0.177,0.167 10 true *2
*1 Adjuster Case
*2 Lock Piece


Using a precision screwdriver, pull out the lock piece of the adjuster case.


iii.

Using your fingers, gently pull the cable rod towards the rear of the vehicle to remove backlash.


iv.
C365198C02
2.698,1.156 2.479,0.969 true 1.823,1.073 1.531,0.813 true 2.719,1.104 2.927,1.271 0.208,0.167 10 true *1 1.333,0.708 1.521,0.875 0.188,0.167 10 true *2
*1 Adjuster Case
*2 Lock Piece


Push in the lock piece of the adjuster case to lock it.


v.
C365199C02
2.344,1.042 2.552,1.219 true 1.375,0.906 1.583,1.104 true 2.573,1.146 2.781,1.323 0.208,0.177 10 true *1 1.177,0.813 1.365,0.969 0.188,0.156 10 true *2
*1 Adjuster Case
*2 Stopper


Turn the stopper of the adjuster case in the direction shown by the arrow.

NOTICE:

If the cover is not moved far enough, it will not engage with the lock piece, the cable rod will not be able to lock, and reliable shift operation will not be possible.




b.

for TMC Made:

i.
C365190C01
1.104,1.542 1.302,1.208 true 1.938,1.542 1.677,1.177 true 1,1.542 1.208,1.719 0.208,0.177 10 true *1 1.896,1.552 2.104,1.729 0.208,0.177 10 true *2
*1 Adjuster Case
*2 Cover


Slide the cover in the direction shown by the arrow.


ii.
C365191C01
0.99,1.604 1.135,1.219 true 1.667,1.604 1.438,1.146 true 0.896,1.604 1.094,1.792 0.198,0.188 10 true *1 1.615,1.604 1.823,1.792 0.208,0.188 10 true *2
*1 Adjuster Case
*2 Lock Piece


Using a precision screwdriver, pull up the lock piece.


iii.
C235817C06
0.573,1.396 0.781,1.177 false 0.417,1.302 0.729,1.458 0.313,0.156 10 false *1
*1 Cable Rod


Using your fingers, gently pull the cable rod towards the rear of the vehicle to remove backlash.


iv.
C365192C01
1.063,1.51 1.292,1.135 true 1.74,1.479 1.521,1.125 true 0.938,1.521 1.156,1.708 0.219,0.188 10 true *1 1.688,1.469 1.896,1.656 0.208,0.188 10 true *2
*1 Adjuster Case
*2 Lock Piece


Push in the lock piece to lock it.


v.
C365193C01
0.979,1.479 1.177,1.177 true 1.948,1.469 1.75,1.188 true 0.865,1.49 1.052,1.677 0.188,0.188 10 true *1 1.854,1.469 2.042,1.646 0.188,0.177 10 true *2
*1 Adjuster Case
*2 Cover


Slide the cover in the direction shown by the arrow.

NOTICE:

If the cover is not moved far enough, it will not engage with the lock piece, the cable rod will not be able to lock, and reliable shift operation will not be possible.




Hide 5.INSTALL REAR CONSOLE BOX ASSEMBLY

Hide 33504F 6.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY