Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for 8NR-FTS)
RM32H0E _54 Brake _060040 BRAKE SYSTEM (OTHER) _0299736 VACUUM PUMP(for 8NR-FTS) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 8NR-FTS)  INSTALLATION  


PROCEDURE

Hide 29300 1.INSTALL VACUUM PUMP ASSEMBLY

a.

When using a new vacuum pump assembly:

i.
C326537C03
1.698,1.167 2.094,0.406 2.094,0.406 2.427,0.406 true 0.823,2.021 1.125,2.021 1.125,2.021 1.125,1.781 true 2.469,0.344 2.781,0.5 0.313,0.156 10 false *1 0.656,1.958 0.969,2.115 0.313,0.156 10 false *2
*1 No. 2 O-ring
*2 No. 3 O-ring


Apply engine oil to the No. 2 O-ring and No. 3 O-ring which are installed to a new vacuum pump assembly.



b.

When reusing the vacuum pump assembly:

i.
C326537C03
1.698,1.167 2.094,0.406 2.094,0.406 2.427,0.406 true 0.823,2.021 1.125,2.021 1.125,2.021 1.125,1.781 true 2.469,0.344 2.781,0.5 0.313,0.156 10 false *1 0.656,1.958 0.969,2.115 0.313,0.156 10 false *2
*1 No. 2 O-ring
*2 No. 3 O-ring


Apply engine oil to a new No. 2 O-ring and No. 3 O-ring and install them to the vacuum pump assembly.



c.
C366920C01
1.281,0.979 1.906,0.635 true 1.729,1.542 2.115,1.375 true 1.969,0.448 2.208,0.646 0.24,0.198 10 true *b 1.458,1.542 1.698,1.74 0.24,0.198 10 true *a
*a Coupling Teeth
*b Groove


Apply engine oil to the inner surface of the installation hole.


d.

Install the vacuum pump assembly so that the oil pipe engages with the hole of the camshaft and the coupling teeth with the grooves on the camshaft tip.

NOTICE:
·

Ensure that the vacuum pump assembly is installed securely.

·

Be careful not to pinch the O-ring.




e.

Install the vacuum pump assembly with the 3 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:

After installation, check that there are no gaps between the matching surfaces and that the vacuum pump assembly is not installed at an angle.



f.

Connect the No. 1 vacuum transmitting hose assembly to the vacuum pump assembly.


Hide 2.CONNECT UNION TO CONNECTOR TUBE HOSE

a.

Connect the union to connector tube hose, and slide the clip to secure it.


Hide 28800 3.INSTALL BATTERY