Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR (for AWD)
RM32H0E _54 Brake _060039 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0298595 REAR SPEED SENSOR(for AWD) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR(for AWD)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 89544E 1.INSTALL REAR SKID CONTROL SENSOR

a.

Install the rear skid control sensor to the rear axle carrier sub-assembly with the bolt.

Torque:
: 8.5 N*m (87 kgf*cm, 75 in.*lbf)


b.
C368012

Connect the skid control sensor connector to the skid control sensor.


Hide 2.INSTALL REAR WHEEL