Home › Drivetrain › EC69 (MANUAL TRANSMISSION / TRANSAXLE) › SHIFT LEVER ASSEMBLY › 2016.10–2019.09
RM32H0E _52 Drivetrain _060311 EC69 MANUAL TRANSMISSION / TRANSAXLE _0303338 SHIFT LEVER ASSEMBLY A

EC69 MANUAL TRANSMISSION / TRANSAXLE  SHIFT LEVER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 33530F 1.INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY

a.

Install the floor shift shift lever assembly with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Engage the 2 claws to connect the transmission control cable assembly to the floor shift lever assembly.

NOTICE:

Make sure that the claws are firmly engaged.



b.

Connect the transmission control shift cable to the floor shift lever assembly.


c.

Connect the transmission control select cable to the floor shift lever assembly with the clip.

NOTICE:
·

Make sure that the lock piece of the transmission control select cable length adjustment structure is facing upward when the transmission control select cable is connected.

·

Make sure that the transmission control select cable is securely installed.




Hide 33820B 3.ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 58910C 4.INSTALL REAR CONSOLE BOX ASSEMBLY