Use the same procedure for the RH side and LH side.
The following procedure listed below is for LH side.
81890D
1.INSTALL OUTER MIRROR LIGHT ASSEMBLY (for TMMT Made)
Connect the connector to install the outer mirror light assembly.
Engage the grommet.
Engage the claws to install the outer mirror hole cover.
Engage the claws to install the outer mirror hole cover with the outer mirror light assembly.
81890D
2.INSTALL OUTER MIRROR LIGHT ASSEMBLY (for TMC Made)
Connect the connector to install the outer mirror light assembly.
Install the grommet.
Engage the claws to install the outer mirror lower cover.
81741
3.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY (for TMC Made)
87945
4.INSTALL OUTER MIRROR COVER (for TMC Made)
5.INSTALL OUTER MIRROR (for TMC Made)
6.INSTALL OUTER MIRROR (for TMMT Made)