Home › Drivetrain › GF1A (TRANSFER / 4WD / AWD) › DYNAMIC TORQUE CONTROL AWD SYSTEM › 2018.05–2019.09
RM32H0E _52 Drivetrain _059725 GF1A TRANSFER / 4WD / AWD _0298220 DYNAMIC TORQUE CONTROL AWD SYSTEM D

GF1A TRANSFER / 4WD / AWD  DYNAMIC TORQUE CONTROL AWD SYSTEM  DIAGNOSIS SYSTEM  


DESCRIPTION


Dynamic torque control AWD system data can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs. Therefore when there seems to be a problem with the dynamic torque control AWD system, use the GTS or SST to check and troubleshoot it.


CHECK DATA LINK CONNECTOR 3 (DLC3)




FUNCTION OF AWD WARNING LIGHT


a.

The AWD warning message displayed on the multi-information display warns the driver of abnormal or poor condition of the dynamic torque control AWD system.


b.

If the 4WD ECU assembly detects a malfunction, the multi-information display displays warning messages in accordance with the trouble area to warn the driver.



CHECK WARNING LIGHT AND INDICATOR LIGHT


a.

Check AWD warning.

i.
C368526C01
0.094,1.083 0.594,1.333 0.5,0.25 1.583,0.917 1.917,0.417 true 2,1.833 1.76,1.479 true 0.167,0.167 0.583,0.5 0.417,0.333 10 false *a 1.99,0.333 2.385,0.583 0.396,0.25 10 false CG 0.229,1.083 0.625,1.333 0.396,0.25 10 false F41 1.948,1.844 2.344,2.094 0.396,0.25 10 false TC
*a Front view of DLC3


Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3 (to enter diagnostic mode).

SST
09843-18040  


ii.

Turn the ignition switch to ON.


iii.

"DIAG AWD" is displayed on the multi-information display, and the 4WD ECU assembly checks the system for malfunctions.

·

If the dynamic torque control AWD system is normal, or "DIAG AWD FF"is displayed on the multi-information display.

·

If the dynamic torque control AWD system is not normal, "DIAG AWD XX (DTC)" is displayed on the multi-information display.

·

Although the test mode is not set for the dynamic torque control AWD system, the message is displayed on the multi-information display when the test mode is activated for checking the VSC, etc.


HINT:
·

Test mode DTCs will not be stored because the test mode is not set.

·

If the systems above are not displayed on the multi-information display, there may be a malfunction in "TC and CG Terminal Circuit".

Click hereDrivetrain>GF1A (TRANSFER / 4WD / AWD)>DYNAMIC TORQUE CONTROL AWD SYSTEM>TC and CG Terminal Circuit

·

If the AWD warning check result is not normal, proceed to troubleshooting for the AWD warning light circuit.






Trouble Area See procedure
AWD warning light (Remains on) (Click here)
AWD warning light (Does not come on) (Click here)
AWD lock indicator light (Does not come on) (Click here)