Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL RECEIVER › from 2019.09
RM32H0E _58 Vehicle Interior _059647 DOOR LOCK _0292602 DOOR CONTROL RECEIVER A

DOOR LOCK  DOOR CONTROL RECEIVER  INSTALLATION  


PROCEDURE

Hide 89741 1.INSTALL DOOR CONTROL RECEIVER (w/o Smart Key System)

NOTICE:
·

Do not drop, strike or otherwise subject the door control receiver to impact.

·

If the door control receiver is subjected to an impact, replace it with a new one.



a.
B557543C01
2.5,0.167 3.333,2 0.833,1.833 2.5,0.917 3.333,0.917 false 2.5,1.5 3.333,1.5 false 2.552,0.219 2.875,0.427 0.323,0.208 12 false *A 2.552,0.969 2.865,1.188 0.313,0.219 12 false *B 2.542,1.542 2.854,1.76 0.313,0.219 12 false *C
*A for Type A
*B for Type B
*C for Type C


Connect the connector.


b.

Engage the guides.


c.

Install the door control receiver with the bolt.

Torque:
for Type A : 10 N*m (102 kgf*cm, 7 ft.*lbf)
for Type B : 13 N*m (133 kgf*cm, 10 ft.*lbf)
for Type C : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 89740A 2.INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY (w/ Smart Key System)

NOTICE:
·

Do not drop, strike or otherwise subject the smart door control receiver assembly to impact.

·

If the smart door control receiver assembly is subjected to an impact, replace it with a new one.



a.
B557544C01
2.5,0.167 3.333,2 0.833,1.833 2.5,0.917 3.333,0.917 false 2.5,1.5 3.333,1.5 false 2.552,0.208 2.844,0.438 0.292,0.229 12 false *A 2.552,0.948 2.823,1.146 0.271,0.198 12 false *B 2.542,1.531 2.813,1.729 0.271,0.198 12 false *C
*A for Type A
*B for Type B
*C for Type C


Connect the connector.


b.

Engage the guides.


c.

Install the smart door control receiver assembly with the bolt.

Torque:
for Type A : 10 N*m (102 kgf*cm, 7 ft.*lbf)
for Type B : 13 N*m (133 kgf*cm, 10 ft.*lbf)
for Type C : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 897A0 3.INSTALL DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (w/ Tire Pressure Warning System)

NOTICE:
·

Do not drop, strike or otherwise subject the door control and tire pressure monitoring system receiver assembly to impact.

·

If the door control and tire pressure monitoring system receiver assembly is subjected to an impact, replace it with a new one.



a.
B557532C01
2.5,0.25 3.25,2 0.75,1.75 2.5,0.833 3.25,0.833 false 2.5,1.417 3.25,1.417 false 2.531,0.292 2.802,0.531 0.271,0.24 12 false *A 2.552,0.885 2.844,1.104 0.292,0.219 12 false *B 2.542,1.49 2.813,1.729 0.271,0.24 12 false *C
*A for Type A
*B for Type B
*C for Type C


Connect the connector.


b.

Engage the guides.


c.

Install the door control and tire pressure monitoring system receiver assembly with the bolt.

Torque:
for Type A : 10 N*m (102 kgf*cm, 7 ft.*lbf)
for Type B : 13 N*m (133 kgf*cm, 10 ft.*lbf)
for Type C : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 62480A 4.INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

Hide 5. REGISTER TRANSMITTER ID (w/ Tire Pressure Warning System)

Hide 6.INSPECT TIRE PRESSURE WARNING SYSTEM (w/ Tire Pressure Warning System)

Hide 7.PERFORM INITIALIZATION (w/ Tire Pressure Warning System)